*1 Melt flow rate measurement conditions: 190 ° C 2.16 kg
MP, MH series
Test Items | Test method | Unit | MP480-2 | MH180-2 | |
---|---|---|---|---|---|
Density | ASTM D792 | g/cm3 | 1.95 | 1.96 | |
Melt Flow Rate (230℃ 2.16kg) | ASTM D1238 | g/10min | 0.1 | 0.2 *1 | |
Tensile Properties | Strength | ASTM D638 | MPa | — | — |
Elongation at Break | % | — | — | ||
Flexural Properties | Strength | ASTM D790 | MPa | — | — |
Modulus | MPa | — | — | ||
Izod Impact Strength | Notched | ASTM D256 | kJ/m2 | — | — |
Product Features | Masterbatch |
Caution | |
---|---|
1. | Data in this show sample figures measured under certain specific conditions. |
2. | Usage of products in this catalogue does not warrant a successful result of applications of the product for specific usage. |
3. | In case of product used for purpose and usage introduced in this catalogue, please pay attention to industrial property rights of third party which may relate to such use. |
4. | In case of product used for medical device, please consult with the manufacturer before such use. |
5. | Please notice that the content of this catalogue may be altered from time to time according to improvement of products without prior note. |