Water-insoluble cutting oil｜Industrial lubricating oil
Idemitsu proposes the use of "non-chlorine cutting oil" from the perspective of environmental protection. Although the guidelines also include chlorine-based cutting oils, we recommend that customers who are currently using chlorine-based cutting oils refer to these guidelines and switch to non-chlorine-based cutting oils.
| Copper alloy | aluminum alloy | cast iron | Carbon steel | Alloy steel | stainless | ||
|---|---|---|---|---|---|---|---|
| Turret multi-blade lathe | marg plus | MP5 | MP15 | MP15 | TH10 | ||
| Drill | marg plus | MP5 | MP15 | MP15 | ST25 | ST25H | |
| reamer tap | marg plus | MP10 | MP10 | TH10 | TH10 | ST25 | ST25H |
| Gun drill gun reamer BTA | marg plus | MP10 | DH10A | ST25 | ST25H | ||
| milling hob | cut | HS-8M | HS-32 | HS-32 | GC-40 | ||
| marg plus | HV15S |
NH25 HV15S GC20 |
NH25 HV15S GC20 |
HV15S GC20 |
|||
| pinion cutter | cut | GC40 | GC40 | GC40 | |||
| marg plus |
GC20 HV15S |
GC20 HV15S |
GC20 HV15S |
GC20 HV15S |
|||
| Copper alloy | aluminum alloy | cast iron | Carbon steel | Alloy steel | stainless | ||
|---|---|---|---|---|---|---|---|
| brooch | marg plus | BR20 | BR20 | SB20GD | SB20GD | ||
| automatic lathe | marg plus | LA30 | MP5 | AM20CS |
AM20CS AM20HS |
AM20CX AM30CX |
|
| gear grinding screw grinding | cut | AG20M | AG20M | ||||
| marg plus | HG30D | HG30D | |||||
| honing wrapping | cut | HL-5 | HL-5 | HL-5 | HL-5 | ||
| marg plus | SF35 | SF35 | SF35 | ||||
| electrical discharge machining | cut | HL-25 | HL-25 | ||||
| marg plus | ED2P | ED2P | |||||
Classification according to JIS [JIS K 2241 (2000)]
| JIS classification |
kinematic viscosity mm2 /s (40℃) |
fatty oil mass % |
Total sulfur content mass % |
copper plate corrosion |
Pull fire point ℃ |
style motion point ℃ |
Endurance load heavy Noh MPa |
Idemitsu equivalent product | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
| seed | issue |
100℃ 1 hour |
150℃ 1 hour |
Daphne marg plus | Daphne cut | ||||||
| N1 type | 1 |
Ten Not yet Full |
Ten Not yet Full |
- ※1 |
- |
1 Below under |
70 Below Up |
0.1 Below Up |
LA5, LA10, NM10 | UP-4S, LP-30, GS-30, HL-2 | |
| 2 |
Ten Below Up |
||||||||||
| 3 |
Ten Below Up |
Ten Not yet Full |
130 Below Up |
6981 | |||||||
| 4 |
Ten Below Up |
||||||||||
| JIS not applicable | S | HL-25, UP-2A, LS-5, LS-15 | |||||||||
| N2 type | 1 |
Ten Not yet Full |
Ten Not yet Full |
5 or less | - |
2 Not yet Full |
70 Below Up |
-Five Below under |
0.1 Below Up |
||
| 2 |
Ten Below Up |
||||||||||
| 3 |
Ten Below Up |
Ten Not yet Full |
130 Below Up |
HS-8M | |||||||
| 4 |
Ten Below Up |
||||||||||
| JIS not applicable | |||||||||||
| N3 type | 1 |
Ten Not yet Full |
Ten Not yet Full |
1 Not yet Full *2 |
2 Below under |
2 Below Up |
70 Below Up |
-Five Below under |
0.15 Below Up |
MP10, MP5 |
Daphne wrapping oil No.3 |
| 2 |
Ten Below Up |
||||||||||
| 3 |
Ten Below Up |
Ten Not yet Full |
130 Below Up |
LA20, LA30, NM20, DW15, MP15 |
GC-25, AG-20M, HS-80, HS-32 | ||||||
| 4 |
Ten Below Up |
||||||||||
| 5 |
Ten Not yet Full |
Ten Not yet Full |
1 Below Up *2 5 or less |
70 Below Up |
0.25 Below Up |
||||||
| 6 |
Ten Below Up |
||||||||||
| 7 |
Ten Below Up |
Ten Not yet Full |
130 Below Up |
L, H, LA15, AM30 |
GC-40 | ||||||
| 8 |
Ten Below Up |
||||||||||
| JIS not applicable | |||||||||||
| N4 type | 1 |
Ten Not yet Full |
Ten Not yet Full |
1 Not yet Full *2 |
3 Below Up |
- |
70 Below Up |
-Five Below under |
0.15 Below Up |
DH10 | HL-5, PC-5, SF-5 |
| 2 |
Ten Below Up |
||||||||||
| 3 |
Ten Below Up |
Ten Not yet Full |
130 or more |
BR20, DH20T |
|||||||
| 4 |
Ten Below Up |
||||||||||
| 5 |
Ten Not yet Full |
Ten Not yet Full |
1 Below Up *2 Five Below under |
70 Below Up |
0.25 Below Up |
GD10 | |||||
| 6 |
Ten Below Up |
||||||||||
| 7 |
Ten Below Up |
Ten Not yet Full |
130 Below Up |
TH10, AM20, HM25, NM15, MP25 LS, DH10A |
|||||||
| 8 |
Ten Below Up |
||||||||||
| JIS not applicable | |||||||||||
-
Contains no sulfur content derived from sulfur-based extreme pressure additives.
-
Addition of sulfur-based extreme pressure additive is mandatory.