special grade
| Grade classification | glass fiber content | grade name | Purpose |
|---|---|---|---|
| special grade | |||
| non-reinforced | SP130 | Automobiles, electronic parts | |
| GF15% | SP140 | ||
| GF30% | SP151 | ||
| non-reinforced | SW130 | Drinking water, food (JPN) |
-
The uses described in this document do not guarantee the results of applying this product to those uses.
-
When using the product for the purposes introduced in this document, please be careful about infringing on industrial property rights (patent rights, utility model rights, design rights, trademark rights). (Our company is not responsible for infringement of industrial property rights.)
-
It cannot be used for medical equipment or medical products.
-
If the product is to be used in food utensils or packaging, please have our sales representative thoroughly confirm the compatibility of the applicable grade with relevant laws and regulations (Food Sanitation Law, etc.) before signing the delivery specifications. I will do it.
-
It is the customer's responsibility to check the compliance of products processed by the customer with various laws and regulations using our products as raw materials.
-
Please note that the contents of this document are subject to change without notice due to improvements.
SP130, SP140, SP151
A grade for plating. Most grades of "ZALEC" can be electroless plated by selecting an appropriate process, but in particular when sufficient adhesion strength of the plating layer is required for thin-walled molded products, the plating-specific grade of this series is suitable. Suitable.
SP130 is unreinforced, SP140 is reinforced with 15% glass fiber, and SP151 is reinforced with 30% glass fiber, so you can use them depending on the required rigidity, dielectric constant, specific gravity, etc.
Suitable for precision plated electrical and electronic parts such as MIDs, shield cases, and antennas.
SW130
It is not reinforced and has a good appearance.
This grade has appropriate elastic modulus and heat resistance due to the addition of non-material filler, making it suitable for trays, etc.
Physical properties table
October 1, 2020
| Test items | Measurement method | (Measurement condition) | Unit | SP130 | SP140 | SP151 | SW130 |
|---|---|---|---|---|---|---|---|
| ISO material display | ＞PS-ST-MD25＜ | ＞PS-ST-GF15＜ | ＞PS-ST-GF30＜ | ＞PS-ST-MD25＜ | |||
| NSF color | － | － | － | － | |||
| physical properties | |||||||
| density | ISO 1183 | g/cm3 | 1.18 | 1.31 | 1.41 | 1.21 | |
| glass fiber content | wt% | － | 15 | 30 | － | ||
| Water absorption rate | ISO 62 | 24h 50%RH | ％ | 0.01 | 0.01 | 0.02 | 0.02 |
| Mechanical properties | |||||||
| Tensile breaking strength | ISO 527 | MPa | 35 | 75 | 100 | Y38 | |
| tensile modulus | MPa | 3,200 | 6,500 | 11,000 | 3,800 | ||
| Tensile elongation at break | ％ | 3.4 | 2.5 | 2.1 | 3.3 | ||
| bending strength | ISO 178 | MPa | 65 | 120 | 165 | 72 | |
| bending modulus | MPa | 3,000 | 6,100 | 9,800 | 3,400 | ||
| Izod impact strength | ISO 180 | With notch at 23℃ | kJ/ m2 | 4 | 10 | 10 | 3 |
| No notch at 23℃ | 29 | 29 | 29 | 20 | |||
| Charpy impact strength | ISO 179 | With notch at 23℃ | kJ/ m2 | 4 | 10 | 9 | 3 |
| No notch at 23℃ | 41 | 33 | 32 | 30 | |||
| thermal properties | |||||||
| Load deflection temperature | ISO 75A | 1.8MPa | ℃ | 100 | 175 | 230 | 98 |
| ISO 75B | 0.45MPa | 120 | 255 | 265 | 163 | ||
| Linear expansion coefficient | TMA | Flow direction (MD), -30 to 30℃ | x10-6 mm/mm/℃ | 77 | 33 | 22 | 55 |
| Right angle direction (TD), -30~30℃ | 83 | 71 | 49 | 76 | |||
| Molding shrinkage rate | Idemitsu method | Flow direction (MD) mold temperature 80℃ | ％ | 0.4 - 1.4 | 0.2 - 0.5 | 0.1 - 0.4 | 0.4 - 1.3 |
| Right angle direction (TD) mold temperature 80℃ | 0.4 - 1.2 | 0.3 - 0.7 | 0.3 - 0.7 | 0.5 - 1.5 | |||
| Flow direction (MD) mold temperature 150℃ | ％ | － | － | － | － | ||
| Right angle direction (TD) mold temperature 150℃ | － | － | － | － | |||
| Flammability/UL related standards, etc. | |||||||
| Combustion quality | UL94 | HB minimum thickness | mm | 1.5 | 1.5 | HB equivalent | － |
| V-0 minimum thickness | － | － | － | － | |||
| 5VA minimum thickness | － | － | － | － | |||
|
Temperature index RTI Elec Imp Str |
UL 746B | ℃ | 50 | 50 | － | － | |
| 50 | 50 | － | － | ||||
| 50 | 50 | － | － | ||||
| Tracking resistance (CTI) | IEC 60112, Solution A | PLC level |
0 equivalent |
0 equivalent |
0 equivalent |
－ | |
| High voltage arc tracking rate (HVTR) | UL 746A | PLC level | － | － | － | － | |
| Hot wire ignitability (HWI) | UL 746A | @3.0mm | PLC level | － | － | － | － |
| @1.5mm | － | － | － | － | |||
| @0.75mm | － | － | － | － | |||
| High current arc ignitability (HAI) | UL 746A | @3.0mm | PLC level | － | － | － | － |
| @1.5mm | － | － | － | － | |||
| @0.75mm | － | － | － | － | |||
| arc resistance | ASTM D495 | PLC level | 6 equivalent | 6 equivalent | 6 equivalent | － | |
| Electrical characteristics | |||||||
| Volume resistivity | IEC 60093 | Ohm-cm | >1E+16 | >1E+16 | >1E+16 | － | |
| Withstand voltage (dielectric breakdown strength) | ASTM D149 | kV/mm | 70 | 50 | 50 | － | |
| relative dielectric constant | IEC 60250 | 1MHz | 2.9 | 3.1 | 3.4 | － | |
| Dissipation tangent | IEC 60250 | 1MHz | <0.001 | <0.001 | <0.001 | － | |
| Standard molding conditions | |||||||
| cylinder temperature | ℃ | 280 - 310 | 280 - 310 | 280 - 310 | 280 - 310 | ||
| mold temperature | ℃ | ※1 | 130-155 | 130-155 | ※1 | ||
| Drying conditions | 120℃, 3-5 hours | 120℃, 3-5 hours | 120℃, 3-5 hours | 80℃, 3-5 hours | |||
*1 Please contact our sales representative.
-
The data presented in this document are representative of measurements obtained under specific conditions.
-
The uses described in this document do not guarantee the results of applying this product to those uses.
-
When using the product for the purposes introduced in this document, please be careful about infringing on industrial property rights (patent rights, utility model rights, design rights, trademark rights). (Our company is not responsible for infringement of industrial property rights.)
-
It cannot be used for medical equipment or medical products.
-
If the product is to be used for food utensils or packaging, please have our sales representative thoroughly confirm the compatibility of the applicable grade with relevant laws and regulations (Food Sanitation Law, etc.) in advance and sign the delivery specifications. I will do it.
-
It is the customer's responsibility to check the compliance of products processed by the customer with various laws and regulations using our products as raw materials.
-
Please note that the contents of this document are subject to change without notice due to improvements.
-
The flammability described in this document is an evaluation based on small-scale tests, and cannot be directly applied to the evaluation of danger in an actual fire.