PC flame retardant grade

grade name Purpose
Non-bromine non-phosphorus flame retardant Transparent 1.5V-0 AZ1900T Printer/copier parts, LCD projector parts, terminal blocks, relay cases, connectors, modular plugs, lamp covers, LED lamps, battery cases, fire alarms, covers, TV exteriors
Transparent 3.0V-0 RY1900, RY2200, IRY2200, VRY2200, IVY2200R
Transparent V-2 RE1900
Opacity AZ1900, AZ2201
flame retardant free AC1030, AC1080
Phosphorous flame retardant AK3020, DK3722

Physical properties table

January 20, 2022

transparent

Features transparent
Thin wall flame retardant
transparent transparent transparent transparent
Weatherproof
UL746C:f1
transparent
Weatherproof
UL746C:f1
transparent
Flame retardant V-2
Grade name AZ1900T RY1900 RY2200 IRY2200 VRY2200 IVY2200R RE1900
Test items Unit Measurement method (Measurement method, conditions) >PC< >PC< >PC< >PC< >PC< >PC< >PC<
density g/cm3 ISO 1183 (JIS K7112) 1.2 1.2 1.2 1.2 1.2 1.2 1.2
Water absorption rate ISO 62 (JIS K7209) 24h 50%RH 0.23 0.23 0.23 0.23 0.23 0.23 0.23
flow characteristics
Melt volume flow rate (MVR) cm3 /10min ISO 1133(JIS K7210) 300℃
1.20kg
300℃
1.20kg
300℃
1.20kg
300℃
1.20kg
300℃
1.20kg
300℃
1.20kg
300℃
1.20kg
5 18 12 12 12 12 19
Mechanical properties
Tensile (yield) strength *1 MPa ISO 527-1,2 (JIS K7161, 7162) Y65 Y65 Y65 Y65 Y65 Y65 Y65
Tensile fracture strain *2 tB70 tB95 tB95 tB95 tB95 tB95 tB95
bending strength MPa ISO 178 (JIS K7171) 90 90 90 90 90 90 90
bending modulus GPa 2.3 2.3 2.3 2.3 2.3 2.3 2.3
Charpy impact strength kJ/ m2 ISO 179-1(JIS K7111) With notch 23℃ 70 80 80 80 80 70
rockwell hardness ISO 2039-2 (JIS K7202-2) R scale/M scale R120/M50 R120/M50 R120/M50 R120/M50 R120/M50 R120/M50 R120/M50
thermal properties
Load deflection temperature ISO 75-1,2 (JIS K7191-1,2) 0.45MPa 140 140
1.8MPa 125 125 125 125 125 125 125
Vicat softening point ISO 306
Linear expansion coefficient ×10-5/℃ ISO 11359-2 6.5 6.5 6.5 6.5 6.5 6.5 6.5
Molding shrinkage rate Idemitsu method 2mm MD 0.5~0.7 0.5~0.7 0.5~0.7 0.5~0.7 0.5~0.7 0.5~0.7 0.5~0.7
2mm TD 0.5~0.7 0.5~0.7 0.5~0.7 0.5~0.7 0.5~0.7 0.5~0.7 0.5~0.7
optical properties
Total light transmittance ISO 13468-1 (JIS K7361-1) 85~89 85~89 85~89 85~89 85~89 85~89 85~89
Flammability/UL related standards, etc.
Combustion quality mm thickness UL94 Combustion class/minimum thickness V-0/1.5
V-2/0.40
5VA/4.0
V-0/3.0 V-0/3.0 V-0/3.0 V-0/3.0 V-0/3.0 V-2/0.38
Tracking resistance CTI PLC level UL746A 2
UV resistant and water resistant UL746C f1 f1
Temperature Index RTI Elec UL746B 80 130(1.5mm) 130(1.5mm) 130(1.5mm) 130(1.5mm) 130(1.5mm) 130
Temperature Index RTI Imp 80 125(1.5mm) 125(1.5mm) 125(1.5mm) 125(1.5mm) 125(1.5mm) 125
Temperature Index RTI Str 80 130(1.5mm) 130(1.5mm) 130(1.5mm) 130(1.5mm) 130(1.5mm) 130
Electrical characteristics
Withstand voltage (dielectric breakdown strength) kV/mm IEC 60243-1 (JIS C2110) 30 30 30 30 30 30 30
arc resistance PLC level ASTM D495 6 6 6 6
Volume resistivity Ω・cm ASTM D257 1E+16 <
relative dielectric constant IEC 60250 1MHz 2.85 2.85 2.85 2.85 2.85 2.85 2.85
Dissipation tangent 1MHz 0.0092
Standard molding conditions
cylinder temperature 260-300℃ (upper limit 320℃) 260-300℃ (upper limit 320℃) 260-300℃ (upper limit 320℃) 260-300℃ (upper limit 320℃) 260-300℃ (upper limit 320℃) 260-300℃ (upper limit 320℃) 260-300℃ (upper limit 320℃)
mold temperature 80~120℃ 80~120℃ 80~120℃ 80~120℃ 80~120℃ 80~120℃ 80~120℃
Drying conditions 120℃, 5-8 hours 120℃, 5-8 hours 120℃, 5-8 hours 120℃, 5-8 hours 120℃, 5-8 hours 120℃, 5-8 hours 120℃, 5-8 hours

Opacity

Features standard
Thin wall flame retardant
Thin wall flame retardant High flow non-bromine
Thin wall flame retardant V-0
Filler reinforcement
High rigidity
High dimensional accuracy
Grade name AZ1900 AZ2201 AK3020 DK3722
Test items Unit Measurement method (Measurement method, conditions) >PC< >PC< >PC-FR(40) < >PC-(TD+PD)20-FR(40) <
density g/cm3 ISO 1183 (JIS K 7112) 1.2 1.2 1.19 1.38
Water absorption rate ISO 62 (JIS K 7209) 24h 50%RH 0.23 0.23 0.23 -
flow characteristics
Melt volume flow rate (MVR) cm3 /10min ISO 1133(JIS K7210) 300℃
1.20kg
300℃
1.20kg
280℃
2.16kg
260℃
2.16kg
18 12 23 5
Mechanical properties
Tensile (yield) strength *1 MPa ISO 527-1,2 (JIS K7161, 7162) Y65 Y65 Y65 80
Tensile fracture strain *2 tB95 tB95 tB60 tB3
bending strength MPa ISO 178 (JIS K7171) 90 90 90 120
bending modulus GPa 2.3 2.3 2.5 6.3
Charpy impact strength kJ/ m2 ISO 179-1(JIS K7111) With notch 23℃ 4
rockwell hardness ISO 2039-2 (JIS K7202-2) R scale/M scale R120/M50 R120/M50 R120 -
thermal properties
Load deflection temperature ISO 75-1,2 (JIS K7191-1,2) 0.45MPa 138 110 -
1.8MPa 125 125 100 110
Vicat softening point ISO 306
Linear expansion coefficient ×10-5/℃ ISO 11359-2 6.5 6.5 3.6
Molding shrinkage rate Idemitsu method 2mm MD 0.5~0.7 0.5~0.7 0.5~0.7 0.22
2mm TD 0.5~0.7 0.5~0.7 0.5~0.7 0.26
optical properties
Total light transmittance ISO 13468-1 (JIS K7361-1)
Flammability/UL related standards, etc.
Combustion quality mm thickness UL94 Combustion class/minimum thickness V-0/1.5 V-0/1.0
V-2/0.40
V-0/0.75 V-1/0.5 (BK)
V-2/0.35 (BK)
Tracking resistance CTI PLC level UL746A 2 2
UV resistant and water resistant UL746C
Temperature Index RTI Elec UL746B 80 130(1.2mm) 80 80
Temperature Index RTI Imp 80 125(1.2mm) 80 80
Temperature Index RTI Str 80 130(1.2mm) 80 80
Electrical characteristics
Withstand voltage (dielectric breakdown strength) kV/mm IEC 60243-1 (JIS C2110) 30 30
arc resistance PLC level ASTM D495
Volume resistivity Ω・cm ASTM D257
relative dielectric constant IEC 60250 1MHz 2.85 2.85
Dissipation tangent 1MHz
Standard molding conditions
cylinder temperature 260-300℃ (upper limit 320℃) 260-300℃ (upper limit 320℃) 260-280℃ (upper limit 300℃) 260-300℃ (upper limit 320℃)
mold temperature 80~120℃ 80~120℃ 60~80℃ 60~95℃
Drying conditions 120℃, 5-8 hours 120℃, 5-8 hours 100℃, 5-8 hours 80-100℃, 5-8 hours

flame retardant free

Features Flame retardant free
good flow
Thin wall flame retardant
Flame retardant free
high flow
Flame retardant 5V
Grade name AC1030 AC1080
Test items Unit Measurement method (Measurement method, conditions) >PC< >PC<
density g/cm3 ISO 1183 (JIS K 7112) 1.2 1.22
Water absorption rate ISO 62 (JIS K 7209) 24h 50%RH 0.23 0.23
flow characteristics
Melt volume flow rate (MVR) cm3 /10min ISO 1133(JIS K7210) 300℃
1.20kg
260℃
2.16kg
27 11
Mechanical properties
Tensile (yield) strength *1 MPa ISO 527-1,2 (JIS K7161, 7162) Y60 Y60
Tensile fracture strain *2 tB90 tB90
bending strength MPa ISO 178 (JIS K7171) 90 90
bending modulus GPa 2.2 2.9
Charpy impact strength kJ/ m2 ISO 179-1(JIS K7111) With notch 23℃ 20
rockwell hardness ISO 2039-2 (JIS K7202-2) R scale/M scale R120/M50
thermal properties
Load deflection temperature ISO 75-1,2 (JIS K7191-1,2) 0.45MPa
1.8MPa 125 117
Vicat softening point ISO 306
Linear expansion coefficient ×10-5/℃ ISO 11359-2 6.5
Molding shrinkage rate Idemitsu method 2mm MD 0.5~0.7 0.5~0.7
2mm TD 0.5~0.7 0.5~0.7
optical properties
Total light transmittance ISO 13468-1 (JIS K7361-1)
Flammability/UL related standards, etc.
Combustion quality mm thickness UL94 Combustion class/minimum thickness V-0/1.2
5VA/2.5
V-0/1.5
5VA/2.0
Tracking resistance CTI PLC level UL746A
UV resistant and water resistant UL746C
Temperature Index RTI Elec UL746B 130(1.5mm) 80
Temperature Index RTI Imp 115(1.5mm) 80
Temperature Index RTI Str 130(1.5mm) 80
Electrical characteristics
Withstand voltage (dielectric breakdown strength) kV/mm IEC 60243-1 (JIS C2110) 30
arc resistance PLC level ASTM D495
Volume resistivity Ω・cm ASTM D257
relative dielectric constant IEC 60250 1MHz 2.85
Dissipation tangent 1MHz
Standard molding conditions
cylinder temperature 260-300℃ (upper limit 320℃) 260-280℃ (upper limit 290℃)
mold temperature 80~120℃ 60~90℃
Drying conditions 120℃, 5-8 hours 120℃, 5-8 hours
  • For tensile yield stress, add Y in front of the number.

  • For nominal tensile strain at failure, add tB in front of the number.

  • The data presented in this document are representative of measurements obtained under specific conditions.

  • The uses described in this document do not guarantee the results of applying this product to those uses.

  • When using the product for the purposes introduced in this document, please be careful about infringing on industrial property rights (patent rights, utility model rights, design rights, trademark rights). (Our company is not responsible for infringement of industrial property rights.)

  • It cannot be used for medical equipment or medical products.

  • If the product is to be used for food utensils or packaging, please have our sales representative thoroughly confirm the compatibility of the applicable grade with relevant laws and regulations (Food Sanitation Law, etc.) before signing the delivery specifications. I will do it.

  • It is the customer's responsibility to check the compliance of products processed by the customer with various laws and regulations using our products as raw materials.

  • Please note that the contents of this document are subject to change without notice due to improvements.

  • The flammability described in this document is an evaluation based on small-scale tests, and cannot be directly applied to the evaluation of danger in an actual fire.

When exporting, please be aware of the laws and regulations regarding chemical substances in the destination country.
For inquiries regarding the applicability of our products to individual laws and regulations, please contact HP's inquiry desk or sales representative.