Optical grade (LCD, LED lighting applications)
| grade name | Purpose | |
|---|---|---|
| light guide | LC1500 PURE, LC1508 PURE, LC1501 PURE, LC1402 PURE, LC1202 PURE, LC1700 PURE | LCD light guide plate |
| light diffusion | R1700(W3204ENU), V1700R(W3026E), V1700R(W3032E), LZ2500V(S0086E), LZ2510V(W1070ED) | Lighting light diffusion parts |
| Reflection/shading | URC2500, URC2501, URZ2500, URZ2501 | LCD reflector, LED guide light reflector |
| Weatherproof/high transparency | LEV1700KL, LEV2200KL | LED lens |
Optical grade application example: LCD light guide plate
Physical properties table
September 10, 2021
light guide
| Features |
light guiding standard |
light guiding High durability |
light guiding medium flow |
|||
|---|---|---|---|---|---|---|
| Grade name | LC1500 PURE | LC1508 PURE | LC1501 PURE | |||
| Main recommended uses | Light guide plate, light guide film | Light guide plate | Light guide plate | |||
| Test items | Unit | Measurement method | Measurement method and conditions | >PC< | >PC< | >PC< |
| density | g/cm3 | ISO 1183(JIS K 7112) | 1.2 | 1.2 | 1.2 | |
| Water absorption rate | ％ | ISO 62(JIS K 7209) | 24h 50%RH | 0.23 | 0.23 | 0.23 |
| flow characteristics | ||||||
| Melt volume flow rate (MVR) | cm3 /10min | ISO 1133(JIS K7210) |
300℃ 1.20kg |
300℃ 1.20kg |
300℃ 1.20kg |
|
| 65 | 70 | 85 | ||||
| Mechanical properties | ||||||
| Tensile (yield) strength *1 | MPa | ISO 527-1,2 (JIS K7161, 7162) | Y65 | Y65 | Y65 | |
| Tensile fracture strain *2 | ％ | tB80 | tB80 | tB80 | ||
| bending strength | MPa | ISO 178(JIS K7171) | 90 | 90 | 90 | |
| bending modulus | GPa | 2.3 | 2.3 | 2.3 | ||
| Charpy impact strength | kJ/ m2 | ISO 179-1(JIS K7111) | With notch 23℃ | 15 | 12 | 12 |
| rockwell hardness | － | ISO 2039-2(JIS K7202-2) | R scale/M scale | R120/M50 | R120/M50 | R120/M50 |
| thermal properties | ||||||
| Load deflection temperature | ℃ | ISO 75-1,2(JIS K7191-1,2) | 0.45MPa | － | － | － |
| 1.8MPa | 127 | 124 | 125 | |||
| Linear expansion coefficient | ×10-5/℃ | ISO 11359-2 | 6.5 | 6.5 | 6.5 | |
| Molding shrinkage rate | ％ | Idemitsu method | 2mm MD | 0.5～0.7 | 0.5～0.7 | 0.5～0.7 |
| ％ | 2mm TD | 0.5～0.7 | 0.5～0.7 | 0.5～0.7 | ||
| optical properties | ||||||
| Total light transmittance | ％ | ISO 13468-1(JIS K7361-1) | 3mm | 90 | 90 | 90 |
| Haze | ％ | ASTM D1003 | 3mm | － | － | － |
| Diffusivity | Every time | Idemitsu method | 1mm/2mm/3mm | － | － | － |
| refractive index | － | ASTM D542 | 1.585 | 1.585 | 1.585 | |
| reflectance | － | D65 type,10° | － | － | － | |
| Yellow index (YI) | － | ASTM D1925 | － | － | － | |
| Flammability/UL related standards, etc. | ||||||
| Combustion quality | mm thickness | UL94 | Combustion class/minimum thickness | V-2/0.42 | V-2/0.40 | V-2/0.40 |
| Tracking resistance CTI | PLC level | UL746A | － | － | － | |
| UV resistant and water resistant | － | UL746C | － | － | － | |
| Temperature Index RTI Elec | ℃ | UL746B | 80 | 80 | 80 | |
| Temperature Index RTI Imp | 80 | 80 | 80 | |||
| Temperature Index RTI Str | 80 | 80 | 80 | |||
| AMECA | － | － | － | － | ||
| Electrical characteristics | ||||||
| Withstand voltage (dielectric breakdown strength) | kV/mm | IEC 60243-1(JIS C2110) | － | － | － | |
| arc resistance | PLC level | ASTM D495 | － | － | － | |
| Volume resistivity | Ω•cm | ASTM D257 | － | － | － | |
| relative dielectric constant | － | IEC 60250 | 1MHz | － | － | － |
| Dissipation tangent | － | 1MHz | － | － | － | |
| Standard molding conditions | ||||||
| cylinder temperature | 260-300℃ (extrusion temperature 220-260℃) | 260～340℃ | 260～320℃ | |||
| mold temperature | 80-120℃ (extrusion roll temperature 110-145℃) | 80～120℃ | 80～120℃ | |||
| Drying conditions | 120℃, 5-8 hours | 120℃, 5-8 hours | 120℃, 5-8 hours | |||
light guide
| Features |
light guiding high flow |
light guiding ultra high flow |
light guiding extrusion molding |
|||
|---|---|---|---|---|---|---|
| Grade name | LC1402 PURE | LC1202 PURE | LC1700 PURE | |||
| Main recommended uses | Light guide plate | Light guide plate | Light guide plate, light guide film | |||
| Test items | Unit | Measurement method | Measurement method and conditions | >PC< | >PC< | >PC< |
| density | g/cm3 | ISO 1183(JIS K 7112) | 1.2 | 1.2 | 1.2 | |
| Water absorption rate | ％ | ISO 62(JIS K 7209) | 24h 50%RH | 0.23 | 0.23 | 0.23 |
| flow characteristics | ||||||
| Melt volume flow rate (MVR) | cm3 /10min | ISO 1133(JIS K7210) |
300℃ 1.20kg |
300℃ 1.20kg |
300℃ 1.20kg |
|
| 125 | 150 | 40 | ||||
| Mechanical properties | ||||||
| Tensile (yield) strength *1 | MPa | ISO 527-1,2 (JIS K7161, 7162) | Y65 | Y65 | Y65 | |
| Tensile fracture strain *2 | ％ | tB15 | tB10 | tB95 | ||
| bending strength | MPa | ISO 178(JIS K7171) | 100 | 100 | 90 | |
| bending modulus | GPa | 2.3 | 2.3 | 2.3 | ||
| Charpy impact strength | kJ/ m2 | ISO 179-1(JIS K7111) | With notch 23℃ | 9 | 6 | 40 |
| rockwell hardness | － | ISO 2039-2(JIS K7202-2) | R scale/M scale | R120/M50 | R120/M50 | R120/M50 |
| thermal properties | ||||||
| Load deflection temperature | ℃ | ISO 75-1,2(JIS K7191-1,2) | 0.45MPa | 130 | 130 | － |
| 1.8MPa | 120 | 120 | 128 | |||
| Linear expansion coefficient | ×10-5/℃ | ISO 11359-2 | 6.5 | 6.5 | 6.5 | |
| Molding shrinkage rate | ％ | Idemitsu method | 2mm MD | 0.5～0.7 | 0.5～0.7 | 0.5～0.7 |
| ％ | 2mm TD | 0.5～0.7 | 0.5～0.7 | 0.5～0.7 | ||
| optical properties | ||||||
| Total light transmittance | ％ | ISO 13468-1(JIS K7361-1) | 3mm | 90 | 90 | 90 |
| Haze | ％ | ASTM D1003 | 3mm | － | － | － |
| Diffusivity | Every time | Idemitsu method | 1mm/2mm/3mm | － | － | － |
| refractive index | － | ASTM D542 | 1.585 | 1.585 | 1.585 | |
| reflectance | － | D65 type,10° | － | － | － | |
| Yellow index (YI) | － | ASTM D1925 | － | － | － | |
| Flammability/UL related standards, etc. | ||||||
| Combustion quality | mm thickness | UL94 | Combustion class/minimum thickness | V-2/0.40 | V-2/0.40 | V-2/0.40 |
| Tracking resistance CTI | PLC level | UL746A | － | － | － | |
| UV resistant and water resistant | － | UL746C | － | － | － | |
| Temperature Index RTI Elec | ℃ | UL746B | 80 | 80 | 80 | |
| Temperature Index RTI Imp | 80 | 80 | 80 | |||
| Temperature Index RTI Str | 80 | 80 | 80 | |||
| AMECA | － | － | － | － | ||
| Electrical characteristics | ||||||
| Withstand voltage (dielectric breakdown strength) | kV/mm | IEC 60243-1(JIS C2110) | － | － | － | |
| arc resistance | PLC level | ASTM D495 | － | － | － | |
| Volume resistivity | Ω•cm | ASTM D257 | － | － | － | |
| relative dielectric constant | － | IEC 60250 | 1MHz | － | － | － |
| Dissipation tangent | － | 1MHz | － | － | － | |
| Standard molding conditions | ||||||
| cylinder temperature | 280～350℃ | 280～350℃ | 260-300℃ (extrusion temperature 220-260℃) | |||
| mold temperature | 80～110℃ | 80～110℃ | 80-120℃ (extrusion roll temperature 110-145℃) | |||
| Drying conditions | 120℃, 5-8 hours | 120℃, 5-8 hours | 120℃, 5-8 hours | |||
light diffusion
| Features |
light diffusion standard Diffusivity: Medium |
light diffusion Weatherproof Diffusivity: Medium |
light diffusion Weatherproof Diffusivity: High |
light diffusion flame retardant 0.85mm V-0 Weatherproof extrusion molding Diffusivity: low |
light diffusion flame retardant 0.85mm V-0 Weatherproof extrusion molding Diffusivity: High |
|||
|---|---|---|---|---|---|---|---|---|
| Grade name |
R1700 (W3204 ENU) |
V1700R (W3026E) |
V1700R (W3032E) |
LZ2500V (S0086E) |
LZ2510V (W1070ED) |
|||
| Main recommended uses | － | － | － |
Diffusion plate Cover for LED lighting |
Diffusion plate Cover for LED lighting |
|||
| Test items | Unit | Measurement method | Measurement method and conditions | >PC< | >PC< | >PC< | >PC< | >PC< |
| density | g/cm3 | ISO 1183(JIS K 7112) | 1.2 | 1.2 | 1.2 | 1.2 | 1.2 | |
| Water absorption rate | ％ | ISO 62(JIS K 7209) | 24h 50%RH | 0.23 | 0.23 | 0.23 | 0.23 | 0.23 |
| flow characteristics | ||||||||
| Melt volume flow rate (MVR) | cm3 /10min | ISO 1133(JIS K7210) |
300℃ 1.20kg |
300℃ 1.20kg |
300℃ 1.20kg |
300℃ 1.20kg |
300℃ 1.20kg |
|
| 24 | 24 | 24 | 4 | 4 | ||||
| Mechanical properties | ||||||||
| Tensile (yield) strength *1 | MPa | ISO 527-1,2 (JIS K7161, 7162) | Y65 | Y65 | Y65 | Y65 | Y60 | |
| Tensile fracture strain *2 | ％ | tB90 | tB90 | tB90 | tB70 | tB80 | ||
| bending strength | MPa | ISO 178(JIS K7171) | 90 | 90 | 90 | 90 | 100 | |
| bending modulus | GPa | 2.3 | 2.3 | 2.3 | 2.4 | 2.3 | ||
| Charpy impact strength | kJ/ m2 | ISO 179-1(JIS K7111) | With notch 23℃ | 10 | 10 | 10 | 90 | 30 |
| rockwell hardness | － | ISO 2039-2(JIS K7202-2) | R scale/M scale | － | － | － | R120/M50 | R120/M50 |
| thermal properties | ||||||||
| Load deflection temperature | ℃ | ISO 75-1,2(JIS K7191-1,2) | 0.45MPa | － | － | － | 142 | － |
| 1.8MPa | 125 | 125 | 125 | 130 | 129 | |||
| Linear expansion coefficient | ×10-5/℃ | ISO 11359-2 | 6.5 | 6.5 | 6.5 | 6.5 | 6.5 | |
| Molding shrinkage rate | ％ | Idemitsu method | 2mm MD | 0.5～0.7 | 0.5～0.7 | 0.5～0.7 | 0.5～0.7 | 0.5～0.7 |
| ％ | 2mm TD | 0.5～0.7 | 0.5～0.7 | 0.5～0.7 | 0.5～0.7 | 0.5～0.7 | ||
| optical properties | ||||||||
| Total light transmittance | ％ | ISO 13468-1(JIS K7361-1) | 3mm |
90/80/60 (1mm/2mm/ 3mm) |
90/80/60 (1mm/2mm/ 3mm) |
61/52/44 (1mm/2mm/ 3mm) |
86/83/76 (1mm/2mm/ 3mm) |
70/55/47 (1mm/2mm/ 3mm) |
| Haze | ％ | ASTM D1003 | 3mm |
98/99/99 (1mm/2mm/ 3mm) |
98/99/99 (1mm/2mm/ 3mm) |
99/99/99 (1mm/2mm/ 3mm) |
20/30/42 (1mm/2mm/ 3mm) |
99/99/99 (1mm/2mm/ 3mm) |
| Diffusivity | Every time | Idemitsu method | 1mm/2mm/3mm | 19/31/40 | 19/31/40 | 60/63/65 | 4/5/5 | 43/59/63 |
| refractive index | － | ASTM D542 | － | － | － | － | － | |
| reflectance | － | D65 type,10° | － | － | － | － | － | |
| Yellow index (YI) | － | ASTM D1925 | － | － | － | － | － | |
| Flammability/UL related standards, etc. | ||||||||
| Combustion quality | mm thickness | UL94 | Combustion class/minimum thickness | － | － | － | V-0/0.85 | V-0/0.85 |
| Tracking resistance CTI | PLC level | UL746A | － | － | － | 3 | 3 | |
| UV resistant and water resistant | － | UL746C | － | － | － | － | － | |
| Temperature Index RTI Elec | ℃ | UL746B | － | － | － | 80 | 80 | |
| Temperature Index RTI Imp | － | － | － | 80 | 80 | |||
| Temperature Index RTI Str | － | － | － | 80 | 80 | |||
| AMECA | － | － | － | － | － | － | ||
| Electrical characteristics | ||||||||
| Withstand voltage (dielectric breakdown strength) | kV/mm | IEC 60243-1(JIS C2110) | 30 | 30 | 30 | － | － | |
| arc resistance | PLC level | ASTM D495 | － | － | － | － | － | |
| Volume resistivity | Ω•cm | ASTM D257 | 1E+16＜ | 1E+16＜ | 1E+16＜ | － | － | |
| relative dielectric constant | － | IEC 60250 | 1MHz | 2.85 | 2.85 | 2.85 | － | － |
| Dissipation tangent | － | 1MHz | 0.001 | 0.001 | 0.001 | － | － | |
| Standard molding conditions | ||||||||
| cylinder temperature | 260～320℃ | 260～320℃ | 260～320℃ | 260～300℃ | 260～300℃ | |||
| mold temperature | 80～120℃ | 80～120℃ | 80～120℃ | 80～120℃ | 80～120℃ | |||
| Drying conditions | 120℃, 5-8 hours | 120℃, 5-8 hours | 120℃, 5-8 hours | 120℃, 5-8 hours | 120℃, 5-8 hours | |||
Reflection/shading
| Features |
high reflection shading flame retardant 1.5mmV-0 (flame retardant free) |
high reflection High shading flame retardant 1.0mm V-0 (flame retardant free) |
high reflection shading flame retardant 1.5mm V-0 (Non-brominated flame retardant) |
high reflection High shading flame retardant 1.5mm V-0 (Non-brominated flame retardant) |
|||
|---|---|---|---|---|---|---|---|
| Grade name | URC2500 | URC2501 | URZ2500 | URZ2501 | |||
| Main recommended uses |
BLU frame LED reflector |
BLU frame LED reflector |
BLU frame LED reflector |
BLU frame LED reflector |
|||
| Test items | Unit | Measurement method |
Measuring method, conditions |
>PC-MD10< | >PC-MD20< | >PC-MD10FR(40)< | >PC-MD20-FR(40)< |
| density | g/cm3 | ISO 1183(JIS K 7112) | 1.3 | 1.4 | 1.3 | 1.4 | |
| Water absorption rate | ％ | ISO 62(JIS K 7209) | 24h 50%RH | － | － | － | － |
| flow characteristics | |||||||
| Melt volume flow rate (MVR) | cm3 /10min | ISO 1133(JIS K7210) |
300℃ 1.20kg |
300℃ 1.20kg |
300℃ 1.20kg |
300℃ 1.20kg |
|
| 28 | 35 | 42 | 18 | ||||
| Mechanical properties | |||||||
| Tensile (yield) strength *1 | MPa | ISO 527-1,2 (JIS K7161, 7162) | Y60 | Y50 | Y60 | Y50 | |
| Tensile fracture strain *2 | ％ | tB70 | tB70 | tB60 | tB70 | ||
| bending strength | MPa | ISO 178(JIS K7171) | 90 | 80 | 90 | 80 | |
| bending modulus | GPa | 2.4 | 2.2 | 2.6 | 2.7 | ||
| Charpy impact strength | kJ/ m2 | ISO 179-1(JIS K7111) | With notch 23℃ | 40 | 30 | 15 | 30 |
| rockwell hardness | － | ISO 2039-2(JIS K7202-2) | R scale/M scale | － | － | － | － |
| thermal properties | |||||||
| Load deflection temperature | ℃ | ISO 75-1,2(JIS K7191-1,2) | 0.45MPa | 138 | 136 | 127 | 127 |
| 1.8MPa | 126 | 125 | 117 | 117 | |||
| Linear expansion coefficient | ×10-5/℃ | ISO 11359-2 | 6.5 | 6.5 | 6.5 | 6.5 | |
| Molding shrinkage rate | ％ | Idemitsu method | 2mm MD | 0.5～0.7 | 0.5～0.6 | 0.5～0.7 | 0.5～0.7 |
| ％ | 2mm TD | 0.5～0.7 | 0.5～0.6 | 0.5～0.7 | 0.5～0.7 | ||
| optical properties | |||||||
| Total light transmittance | ％ | ISO 13468-1(JIS K7361-1) | 3mm | 0.6(1mm) | 0.1(1mm) | 0.6(1mm) | 0.1(1mm) |
| Haze | ％ | ASTM D1003 | 3mm | － | － | － | － |
| Diffusivity | Every time | Idemitsu method | 1mm/2mm/3mm | － | － | － | － |
| refractive index | － | ASTM D542 | － | － | － | － | |
| reflectance | － | D65 type,10° | 97 | 97.5 | 97 | 97.5 | |
| Yellow index (YI) | － | ASTM D1925 | － | － | － | － | |
| Flammability/UL related standards, etc. | |||||||
| Combustion quality | mm thickness | UL94 | Combustion class/minimum thickness |
V-0/1.5 V-2/0.4 |
V-0/1.0 V-2/0.4 |
V-0/1.5 V-2/0.4 |
V-0/1.5 V-2/0.4 |
| Tracking resistance CTI | PLC level | UL746A | － | － | － | － | |
| UV resistant and water resistant | － | UL746C | － | － | － | － | |
| Temperature Index RTI Elec | ℃ | UL746B | 80 | 80 | 80 | 80 | |
| Temperature Index RTI Imp | 80 | 80 | 80 | 80 | |||
| Temperature Index RTI Str | 80 | 80 | 80 | 80 | |||
| AMECA | － | － | － | － | － | ||
| Electrical characteristics | |||||||
| Withstand voltage (dielectric breakdown strength) | kV/mm | IEC 60243-1(JIS C2110) | － | － | － | － | |
| arc resistance | PLC level | ASTM D495 | － | － | － | － | |
| Volume resistivity | Ω•cm | ASTM D257 | － | － | － | － | |
| relative dielectric constant | － | IEC 60250 | 1MHz | － | － | － | － |
| Dissipation tangent | － | 1MHz | － | － | － | － | |
| Standard molding conditions | |||||||
| cylinder temperature | 260～300℃ | 260～300℃ | 260～300℃ | 260～300℃ | |||
| mold temperature | 80～90℃ | 80～90℃ | 80～90℃ | 80～110℃ | |||
| Drying conditions | 120℃, 5-8 hours | 120℃, 5-8 hours | 120℃, 5-8 hours | 120℃, 5-8 hours | |||
Weatherproof/high transparency
| Features |
Weatherproof high transparency High humidity and heat resistance |
Weatherproof high transparency High humidity and heat resistance high strength |
|||
|---|---|---|---|---|---|
| Grade name | LEV1700KL | LEV2200KL | |||
| Main recommended uses |
Lens for outdoor LED lighting Cover for outdoor LED lighting |
Lens for outdoor LED lighting Cover for outdoor LED lighting |
|||
| Test items | Unit | Measurement method | Measurement method and conditions | >PC< | >PC< |
| density | g/cm3 | ISO 1183(JIS K 7112) | 1.2 | 1.2 | |
| Water absorption rate | ％ | ISO 62(JIS K 7209) | 24h 50%RH | 0.23 | 0.23 |
| flow characteristics | |||||
| Melt volume flow rate (MVR) | cm3 /10min | ISO 1133(JIS K7210) |
300℃ 1.20kg |
300℃ 1.20kg |
|
| 27 | 12 | ||||
| Mechanical properties | |||||
| Tensile (yield) strength *1 | MPa | ISO 527-1,2 (JIS K7161, 7162) | Y65 | Y65 | |
| Tensile fracture strain *2 | ％ | tB95 | tB95 | ||
| bending strength | MPa | ISO 178(JIS K7171) | 90 | 90 | |
| bending modulus | GPa | 2.3 | 2.3 | ||
| Charpy impact strength | kJ/ m2 | ISO 179-1(JIS K7111) | With notch 23℃ | 40 | 80 |
| rockwell hardness | － | ISO 2039-2(JIS K7202-2) | R scale/M scale | R120/M50 | R120/M50 |
| thermal properties | |||||
| Load deflection temperature | ℃ | ISO 75-1,2(JIS K7191-1,2) | 0.45MPa | － | － |
| 1.8MPa | 128 | 125 | |||
| Linear expansion coefficient | ×10-5/℃ | ISO 11359-2 | 6.5 | 6.5 | |
| Molding shrinkage rate | ％ | Idemitsu method | 2mm MD | 0.5～0.7(1mm) | 0.5～0.7(1mm) |
| ％ | 2mm TD | 0.5～0.7(1mm) | 0.5～0.7(1mm) | ||
| optical properties | |||||
| Total light transmittance | ％ | ISO 13468-1(JIS K7361-1) | 3mm | 90 | 90 |
| Haze | ％ | ASTM D1003 | 3mm | － | － |
| Diffusivity | Every time | Idemitsu method | 1mm/2mm/3mm | － | － |
| refractive index | － | ASTM D542 | 1.585 | 1.585 | |
| reflectance | － | D65 type,10° | － | － | |
| Yellow index (YI) | － | ASTM D1925 | － | － | |
| Flammability/UL related standards, etc. | |||||
| Combustion quality | mm thickness | UL94 | Combustion class/minimum thickness | V-2/0.36 | V-2/0.36 |
| Tracking resistance CTI | PLC level | UL746A | 2 | 2 | |
| UV resistant and water resistant | － | UL746C | f1(NC) | f1(NC) | |
| Temperature Index RTI Elec | ℃ | UL746B | 130(0.36mm) | 130(0.36mm) | |
| Temperature Index RTI Imp | 125(0.36mm) | 125(0.36mm) | |||
| Temperature Index RTI Str | 130(0.36mm) | 130(0.36mm) | |||
| AMECA | － | － | － | ||
| Electrical characteristics | |||||
| Withstand voltage (dielectric breakdown strength) | kV/mm | IEC 60243-1(JIS C2110) | － | － | |
| arc resistance | PLC level | ASTM D495 | － | － | |
| Volume resistivity | Ω•cm | ASTM D257 | － | － | |
| relative dielectric constant | － | IEC 60250 | 1MHz | － | － |
| Dissipation tangent | － | 1MHz | － | － | |
| Standard molding conditions | |||||
| cylinder temperature | 260～300℃ | 260～300℃ | |||
| mold temperature | 80～120℃ | 80～120℃ | |||
| Drying conditions | 120℃, 5-8 hours | 120℃, 5-8 hours | |||
-
For tensile yield stress, add Y in front of the number.
-
For nominal tensile strain at failure, add tB in front of the number.
-
The data presented in this document are representative of measurements obtained under specific conditions.
-
The uses described in this document do not guarantee the results of applying this product to those uses.
-
When using the product for the purposes introduced in this document, please be careful about infringing on industrial property rights (patent rights, utility model rights, design rights, trademark rights). (Our company is not responsible for infringement of industrial property rights.)
-
It cannot be used for medical equipment or medical products.
-
If the product is to be used for food utensils or packaging, please have our sales representative thoroughly confirm the compatibility of the applicable grade with relevant laws and regulations (Food Sanitation Law, etc.) before signing the delivery specifications. I will do it.
-
It is the customer's responsibility to check the compliance of products processed by the customer with various laws and regulations using our products as raw materials.
-
Please note that the contents of this document are subject to change without notice due to improvements.
-
The flammability described in this document is an evaluation based on small-scale tests, and cannot be directly applied to the evaluation of danger in an actual fire.
When exporting, please be aware of the laws and regulations regarding chemical substances in the destination country.
For inquiries regarding the applicability of our products to individual laws and regulations, please contact HP's inquiry desk or sales representative.